|
|
SHOCK ABSORBER RSU-11 < REMOVAL AND INSTALLATION > C D F G H I J K L M A B RSU N O P SHOCK ABSORBER Removal and Installation INFOID:0000000006245809 REMOVAL 1. Remove the wheel and tire assembly using power tool. Refer to 2. Position a suitable jack under the front lower link to support the shock absorber. power tool. 4. Remove the shock absorber. INSTALLATION Installation is in the reverse order of removal. • Tighten the shock absorber bolts to specification. Refer to Disposal INFOID:0000000006245810 1. Set shock absorber horizontally with the piston rod fully extended. as shown in the figure to release gas gradually. CAUTION: • Wear eye protection (safety glasses). • Wear gloves. • Be careful with metal chips or oil blown out by the com- pressed gas. NOTE: • Drill vertically in this direction ( ). • Directly to the outer tube avoiding brackets. • The gas is clear, colorless, odorless, and harmless. 3. Position the drilled hole downward and drain oil by moving the piston rod several times. CAUTION: Dispose of drained oil according to the law and local regulations. LEIA0110E A : 20 – 30 mm (0.79 – 1.18 in) JPEIA0161ZZ 2011 Pathfinder |