|
|
EC-894 < DTC/CIRCUIT DIAGNOSIS > [VK56DE] P2138 APP SENSOR OK or NG OK >> GO TO 2. NG >> Repair or replace ground connections. 2. CHECK APP SENSOR 1 POWER SUPPLY CIRCUIT 1. Disconnect accelerator pedal position (APP) sensor (1) harness connector. 2. Turn ignition switch ON. 3. Check voltage between APP sensor terminal 2 and ground with CONSULT-III or tester. OK or NG OK >> GO TO 3. NG >> Repair open circuit or short to ground or short to power in harness or connectors. 3. CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-I 1. Turn ignition switch ON. 2. Check voltage between APP sensor terminal 1 and ground with CONSULT-III or tester. OK or NG OK >> GO TO 8. NG >> GO TO 4. 4. CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-II 1. Turn ignition switch OFF. 2. Disconnect ECM harness connector. 3. Check harness continuity between APP sensor terminal 1 and ECM terminal 91. Refer to Wiring Diagram. BBIA0539E AWBIA0079ZZ Voltage: Approximately 5 V PBIB2608E Voltage: Approximately 5V PBIB2611E 2011 Pathfinder |