|
|
DLN-386 < REMOVAL AND INSTALLATION > [FRONT FINAL DRIVE: M205] SIDE OIL SEAL REMOVAL AND INSTALLATION SIDE OIL SEAL Removal and Installation INFOID:0000000006245195 REMOVAL 1. Remove the front final drive assembly. Refer to DLN-390, "Removal and Installation" 2. Remove the differential side shaft and differential side flange using suitable tool. 3. Place a small hole in the side oil seal case using suitable tool. 4. Remove the side oil seal using Tool as shown. INSTALLATION 1. Apply multi-purpose grease to the lips of the new side oil seal. Then drive the new side oil seal in evenly to the gear carrier using suitable tool. CAUTION: • Do not reuse side oil seal. • Do not incline the new side oil seal when installing. • Apply multi-purpose grease to the lips of the new side oil seal. 2. Installation of the remaining components is in the reverse order of removal. CAUTION: Check the differential gear oil level after installation. Refer to . BDIA0006E LDIA0129E Tool number : SP8P LDIA0130E 2011 Pathfinder |