|
|
DLN-74 < DTC/CIRCUIT DIAGNOSIS > [TRANSFER: ATX14B] P1826 TRANSFER FLUID TEMPERATURE P1826 TRANSFER FLUID TEMPERATURE Description INFOID:0000000006244982 Signal voltage from the transfer fluid temperature sensor is abnormally high (Transfer fluid temperature is abnormally low) while driving. DTC Logic INFOID:0000000006244983 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Perform self-diagnosis. YES >> Perform diagnosis procedure. Refer to . NO >> Inspection End. Diagnosis Procedure INFOID:0000000006244984 Regarding Wiring Diagram information, refer to 1. CHECK TRANSFER FLUID TEMPERATURE SENSOR SIGNAL With CONSULT-III 1. Start engine. 2. Select DATA MONITOR mode for ALL MODE AWD/4WD with CONSULT-III. 3. Read out the value of FLUID TEMP SE. Without CONSULT-III 1. Start engine. 2. Check voltage between transfer control unit harness connector terminals and ground. Are inspection results normal? DTC CONSULT-III Diagnostic item is detected when... Reference [P1826] OIL TEMP SEN Signal voltage from transfer fluid temper- Refer to . Condition Display value (Approx.) Transfer fluid temperature approx. 20 - 80 ° C (68 - 176 ° F) 1.1 - 0.3V Connector Terminal Condition Data (Approx.) M153 28 - Ground Always 0V 31 - Ground Ignition switch: Transfer fluid temperature ° C (68 ° F) 1.1V Transfer fluid temperature ° C (176 ° F) 0.3V SDIA2742E 2011 Pathfinder |