|
|
DLK-242 < DTC/CIRCUIT DIAGNOSIS > [WITHOUT INTELLIGENT KEY SYSTEM] DOOR LOCK ACTUATOR DOOR LOCK ACTUATOR DRIVER SIDE INFOID:0000000006245625 Locks/unlocks the door with the signal from BCM. DRIVER SIDE : Component Function Check INFOID:0000000006245626 1. CHECK FUNCTION 1. Use CONSULT-III to perform Active Test "DOOR LOCK". 2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally. YES >> Door lock actuator is OK. NO >> Refer to DLK-242, "DRIVER SIDE : Diagnosis Procedure" . DRIVER SIDE : Diagnosis Procedure INFOID:0000000006245627 Regarding Wiring Diagram information, refer to DLK-279, "Wiring Diagram - Without Intelligent Key System" 1. CHECK DOOR LOCK ACTUATOR SIGNAL 1. Turn ignition switch OFF. 2. Check voltage between BCM connector M20 terminals 59, 65 and ground. Is the inspection result normal? YES >> GO TO 2 NO >> GO TO 3 2. CHECK DOOR LOCK ACTUATOR HARNESS 1. Disconnect BCM and front door lock assembly LH (actuator). 2. Check continuity between BCM connector (A) M20 terminals 59, 65 and front door lock assembly LH (actuator) connector (B) D14 terminals 1, 2. Is the inspection result normal? YES >> Replace front door lock assembly LH (actuator). NO >> Repair or replace harness. Connector Terminals Condition Voltage (V) (Approx.) (+) (-) M20 59 Ground Driver door lock/unlock 0 → Battery voltage 65 Driver door lock/unlock 0 → Battery voltage LIIA1046E Connector Terminals Connector Terminals Continuity M20 59 D14 2 Yes 65 1 ALKIA1191ZZ 2011 Pathfinder |