|
|
ST-22 < REMOVAL AND INSTALLATION > POWER STEERING GEAR AND LINKAGE POWER STEERING GEAR AND LINKAGE Removal and Installation INFOID:0000000005260173 CAUTION: Spiral cable may snap due to steering operation if the steering column is separated from the steering gear assembly. Therefore secure the steering wheel to avoid turning. REMOVAL 1. Set front wheels in the straight-ahead position. DLN-353, "Removal and Installation" DLN-387, "Removal and Installation" (M205). 6. Remove the stabilizer bar brackets and reposition the stabilizer bar. Refer to . 7. Remove the cotter pins at the steering outer sockets. CAUTION: Do not reuse the cotter pins. 8. Loosen the outer socket nuts. using Tool, then remove the nuts. CAUTION: • Do not damage the outer socket boots. • Do not damage the outer socket threads. Thread the ball joint nut onto the end of the outer socket during removal. 1. Cotter pin 2. Mounting bracket 3. Mounting insulator 4. Steering gear assembly 5. Washer Front AWGIA0024GB Tool number : HT72520000 (J-25730-A) WGIA0130E 2010 Pathfinder |