|
|
MWI-4 < FUNCTION DIAGNOSIS > METER SYSTEM FUNCTION DIAGNOSIS METER SYSTEM METER SYSTEM INFOID:0000000005260323 METER SYSTEM : System Description INFOID:0000000005260324 COMBINATION METER • Speedometer, odo/trip meter, tachometer, fuel gauge, engine coolant temperature gauge, engine oil pres- sure gauge, voltage gauge and trip computer are controlled by the unified meter control unit, which is built into the combination meter. • Warning and indicator lamps are controlled by the unified meter control unit and by components connected directly to the combination meter. • Digital meter is adopted for odo/trip meter*, as well as the A/T position indicator display. *The record of the odometer is kept even if the battery cable is disconnected. The record of the trip meter is erased when the battery cable is disconnected. • Odo/trip meter and A/T indicator segments can be checked in diagnosis mode. • Meter/gauge can be checked in diagnosis mode. NOTE: Under the following conditions, the meters will perform a homing function. The meter pointers will move down slightly and then move back to the resting position. This is a normal design condition. • Approximately 60 seconds after turning the ignition switch from the ON to the OFF position • If the battery is disconnected and then reconnected AWNIA0215GB 2010 Pathfinder |