|
|
EM-56 < ON-VEHICLE REPAIR > [VQ40DE] FRONT TIMING CHAIN CASE • Press-fit oil seal until it becomes flush with front timing chain case end face using suitable drift [outer diameter: 60 mm (2.36 in)]. • Make sure the garter spring is in position and seal lip is not inverted. CAUTION: • Be careful not to damage front timing chain case and crankshaft. • Press-fit straight and avoid causing burrs or tilting oil seal. 3. Install water pump cover and chain tensioner cover to front timing chain case, if removed. • Apply a continuous bead of liquid gasket using Tool to front timing chain case as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to GI-14, "Recommended Chemical Products and Sealants" . 4. Install idler pulley, if removed. ing chain case back side as shown. Use Genuine RTV Silicone Sealant or equivalent. Refer to GI-14, "Recommended Chemical Products and Sealants" . PBIC2911E Tool number : WS39930000 ( — ) PBIC2912E Tool number : WS39930000 ( — ) PBIC2913E 2010 Pathfinder |