|
|
CARRIER COVER DLN-421 < ON-VEHICLE REPAIR > [REAR FINAL DRIVE: R200] C E F G H I J K L M A B DLN N O P CARRIER COVER Removal and Installation INFOID:0000000005258506 REMOVAL 1. Remove the rear final drive assembly. Refer to DLN-422, "Removal and Installation" . 2. Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool. CAUTION: • Do not damage the mating surface. • Do not insert flat-bladed screwdriver, this will damage the mating surface. INSTALLATION 1. Apply a 3 mm (0.12 in) bead of sealant to the mating surface of the carrier cover as shown. • Use Genuine Silicone RTV or equivalent. Refer to "Recommended Chemical Products and Sealants" CAUTION: Remove any old sealant adhering to the mating surfaces. Also remove any moisture, oil, or foreign material adhering to the application and mating surfaces. 2. Install the carrier cover to the gear carrier. Tighten the bolts to the specified torque. Refer to 3. Install the rear final drive assembly. Refer to CAUTION: Fill the rear final drive assembly with recommended differential gear oil. Refer to "Changing Differential Gear Oil" . Tool number : KV10111100 (J-37228) WDIA0123E WDIA0282E 2010 Pathfinder |