|
|
FRONT DOOR GLASS AND REGULATOR GW-15 < REMOVAL AND INSTALLATION > C D E F G H I J L M A B GW N O P FRONT DOOR GLASS AND REGULATOR Front Door Glass INFOID:0000000003938573 REMOVAL 1. Remove the front door finisher. Refer to INT-14, "Removal and Installation" 2. Temporarily reconnect the power window switch. 3. Operate the power window main switch to raise/lower the door 4. Partially remove the inside seal. 5. Remove the glass bolts. 6. While holding the door window, raise it at the rear and pull the INSTALLATION Installation is in the reverse order of removal. • Check the glass for proper fit. Follow the "FITTING INSPECTION" procedure. FITTING INSPECTION • Check that the glass is securely fit into the glass run groove. sash is parallel. If the clearance between the glass and sash is not parallel, loosen the regulator bolts, guide Front Door Glass Regulator INFOID:0000000003938574 REMOVAL 1. Remove the front door finisher. Refer to INT-14, "Removal and Installation" 2. Temporarily reconnect the power window switch. LIIA1686E LIIA1687E Glass bolts : 6.1 N·m (0.62 kg-m, 54 in-lb) 2009 Pathfinder |