|
|
FUEL INJECTOR AND FUEL TUBE EM-185 < ON-VEHICLE REPAIR > [VK56DE] C D E F G H I J K L M A EM N P O • Insert new O-ring straight into fuel tube. Do not twist it. 6. Installation of the remaining components is in the reverse order of removal. INSPECTION AFTER INSTALLATION After installing the fuel tubes, make sure there are no fuel leaks at the connections using the following steps. 1. Apply fuel pressure to the fuel lines by turning ignition switch ON (with engine stopped). Then check for 2. Start the engine and rev it up and check for fuel leaks at the connections. WARNING: Do not touch the engine immediately after stopping, as engine becomes extremely hot. 2009 Pathfinder |