|
|
EC-854 < COMPONENT DIAGNOSIS > [VK56DE] P2A00, P2A03 A/F SENSOR 1 >> GO TO 3. 3. CHECK FOR INTAKE AIR LEAKAGE 1. Start engine and run it at idle. 2. Listen for an intake air leakage after the mass air flow sensor. OK or NG OK >> GO TO 4. NG >> Repair or replace. 4. CLEAR THE SELF-LEARNING DATA With CONSULT-III 1. Start engine and warm it up to normal operating temperature. 2. Select “SELF-LEARNING CONT” in “WORK SUPPORT” mode with CONSULT-III. 3. Clear the self-learning control coefficient by touching “CLEAR”. 4. Run engine for at least 10 minutes at idle speed. Without CONSULT-III 1. Start engine and warm it up to normal operating temperature. 2. Turn ignition switch OFF. 3. Disconnect mass air flow sensor (1) harness connector. - : Vehicle front 4. Restart engine and let it idle for at least 5 seconds. 5. Stop engine and reconnect mass air flow sensor harness con- 6. Check that DTC P0102 is displayed. 7. Erase the DTC memory. Refer to 8. Check that DTC P0000 is displayed. 9. Run engine for at least 10 minutes at idle speed. Yes or No Yes >> Perform trouble diagnosis for DTC P0171, P0174 or P0172, P0175. Refer to or No >> GO TO 5. 5. CHECK HARNESS CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect A/F sensor 1 harness connector. 3. Check harness connector for water. ALBIA0353ZZ ALBIA0360ZZ 1. A/F sensor 1 (bank 2) harness connector 2. A/F sensor 1 (bank 2) 3. A/F sensor 1 (bank 1) 4. A/F sensor 1 (bank 1) harness connector : Vehicle front 2009 Pathfinder |