|
|
DLN-442 < ON-VEHICLE REPAIR > [REAR FINAL DRIVE: R230 (4WD)] FRONT OIL SEAL ON-VEHICLE REPAIR FRONT OIL SEAL Removal and Installation INFOID:0000000003937472 REMOVAL 1. Remove the drive shafts from the rear final drive assembly. Refer to RAX-9, "Removal and Installation" 2. Remove the side flanges and side oil seals. Refer to DLN-444, "Removal and Installation" 3. Remove the rear propeller shaft. Refer to DLN-326, "Removal and Installation" 4. Measure the total preload torque. Refer to DLN-467, "Inspection and Adjustment" . NOTE: 5. Remove the drive pinion lock nut using Tool. 6. Put matching marks on the companion flange and drive pinion CAUTION: Use paint to make the matching marks. Do not damage the 7. Remove the companion flange using suitable tool. 8. Remove the front oil seal using Tool. INSTALLATION Tool number : KV40104000 ( — ) SDIA1142E SDIA1054E Tool number : KV381054S0 (J-34286) SDIA0485E 2009 Pathfinder |