|
|
DLN-106 < ECU DIAGNOSIS > [TRANSFER: ATX14B] TRANSFER CONTROL UNIT CAUTION: • If CAN communication is displayed with other DTCs, first perform the trouble diagnosis for CAN communication line. • If ABS operation signal, VDC operation signal or TCS operation signal is displayed, first perform the trouble diagnosis for ABS system. • If Output shaft revolution signal is displayed, first perform the trouble diagnosis for A/T system. NOTE: • If actuator position switch or actuator circuit is displayed, first erase self-diagnostic results. (Actuator position switch or actuator circuit may be displayed after installing transfer control unit or transfer assembly.) • If clutch pressure switch or line pressure switch is displayed only while driving in reverse, check the continuity of R position on A/T PNP switch. When there is no malfunction found in the electrical system, check the hydraulic system. 2009 Pathfinder |