|
|
KEY SWITCH (BCM INPUT) DLK-257 < COMPONENT DIAGNOSIS > [WITHOUT INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P KEY SWITCH (BCM INPUT) Diagnosis Procedure INFOID:0000000003938367 1. CHECK KEY SWITCH INPUT SIGNAL With CONSULT-III Check key switch "KEY ON SW" in DATA MONITOR mode with CONSULT–III. Refer to LOCK : CONSULT-III Function (BCM - DOOR LOCK)" . • When key is inserted to ignition key cylinder: • When key is removed from ignition key cylinder: Without CONSULT-III Check voltage between BCM connector M18 terminal 37 and Is the inspection result normal? YES >> Key switch (insert) circuit is OK. NO >> GO TO 2 2. CHECK KEY SWITCH (INSERT) 1. Turn ignition switch OFF. 2. Disconnect key switch connector. 3. Check continuity between key switch terminals. Is the inspection result normal? YES >> Repair or replace harness or fuse. NO >> Replace key switch. KEY ON SW : ON KEY ON SW : OFF Connec- tor Terminal Condition Voltage (V) (+) (–) M18 37 Ground Key is inserted. Battery voltage Key is removed. 0 LIIA0567E Terminals Condition Continuity 1 – 2 Key is inserted. Yes Key is removed. No WIIA0559E 2009 Pathfinder |