|
|
A/T DEVICE (PARK POSITION SWITCH) DLK-97 < COMPONENT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P A/T DEVICE (PARK POSITION SWITCH) Diagnosis Procedure INFOID:0000000003938213 1. CHECK A/T DEVICE (PARK POSITION SWITCH) INPUT SIGNAL 1. Turn ignition switch OFF. 2. While pressing the ignition knob switch, check voltage between Intelligent Key unit harness connector Is the inspection result normal? YES >> Replace Intelligent Key unit. Refer to . NO >> GO TO 2 2. CHECK A/T DEVICE (PARK POSITION SWITCH) POWER SUPPLY CIRCUIT 1. Disconnect A/T device (park position switch) connector. 2. While pressing the ignition knob switch, check voltage between Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace harness or ignition knob switch. 3. CHECK A/T DEVICE (PARK POSITION SWITCH) GROUND SUPPLY CIRCUIT Check continuity between A/T device (park position switch) terminal 2 and ground. Is the inspection result normal? YES >> GO TO 4 NO >> Repair or replace harness. 4. CHECK A/T DEVICE (PARK POSITION SWITCH) Check continuity between A/T device (park position switch) terminals 2 and 4. Connector Terminals Condition Voltage (V) (Approx.) (+) (-) M164 39 Ground Selector lever is in "P" position Battery voltage Other than above 0 WIIA1211E 4 – Ground : Battery voltage. ALKIA1202ZZ 2 – Ground : Continuity should exist. ALKIA1201ZZ 2009 Pathfinder |