|
|
DOOR MIRROR MOTOR ADP-91 < COMPONENT DIAGNOSIS > C D E F G H I K L M A B ADP N O P DOOR MIRROR MOTOR Description INFOID:0000000003935585 It makes mirror face operate from side to side and up and down with the electric power that automatic drive Component Function Check INFOID:0000000003935586 1. CHECK DOOR MIRROR MOTOR FUNCTION Check the operation with “MIRROR MOTOR RH” and “MIRROR MOTOR LH” in “ACTIVE TEST” mode with ADP-25, "CONSULT-III Function" . Is the inspection result normal? YES >> Door mirror motor function is OK. NO >> Refer to Diagnosis Procedure INFOID:0000000003935587 1. CHECK DOOR MIRROR MOTOR INPUT SIGNAL 1. Turn ignition switch ON. 2. Check voltage between door mirror connector and ground. Is the inspection result normal? YES >> Refer to ADP-93, "Component Inspection" . NO >> GO TO 2 2. CHECK HARNESS CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector and 3. Check continuity between automatic drive positioner control unit Door mirror LH Terminals Door mirror re- mote control switch condition Voltage (V) (Approx.) (+) (–) Door mirror connector Terminal D18 (LH) D118 (RH) 3 Ground UP Battery voltage Other than above 0 2 LEFT Battery voltage Other than above 0 8 DOWN / RIGHT Battery voltage Other than above 0 LIIA1762E Automatic drive positioner control unit connector Terminal Door mirror LH connector Terminal Continuity M33 16 D18 8 Yes 31 3 32 2 LIIA1756E 2009 Pathfinder |