|
|
AUTOMATIC DRIVE POSITIONER SYSTEM ADP-11 < FUNCTION DIAGNOSIS > C D E F G H I K L M A B ADP N O P AUTOMATIC DRIVE POSITIONER SYSTEM : Component Description INFOID:0000000003935456 CONTROL UNITS INPUT PARTS Switches Entry/Exit assist function Exit On exit, the seat moves backward. Entry On entry, the seat returns from exiting position to the previous driving position. Keyfob interlock function Perform memory operation, exiting operation and entry operation by key unlock oper- Intelligent Key interlock function Perform memory operation, exiting operation and entry operation by Intelligent Key Function Description Item Function Driver seat control unit • Main unit of automatic drive positioner system munication. Automatic drive positioner control unit • It communicates with the driver seat control unit via UART communication. switch. BCM Transmit the following status to the driver seat control unit via CAN communication. operation) • Key ID Combination meter Transmit the vehicle speed signal to the driver seat control unit via CAN communi- AV control unit The setting change of auto drive positioner system can be performed on the display. A/T device (park position switch) Transmit the shift position signal (P range) to the driver seat control unit. Item Function Key switch and ignition knob switch The key switch is installed to detect the key inserted/removed status. Front door switch LH Detect front door (driver side) open/close status. A/T device (park position switch) Detect the P range position of A/T selector lever. Set switch The registration and system setting can be performed with its operation. Seat memory switch 1/2 The registration and operation can be performed with its operation. Power seat switch The following switch is installed. 2009 Pathfinder |