|
|
FRONT WIPER AND WASHER SYSTEM WW-49 < ON-VEHICLE REPAIR > C D E F G H I J K M A B WW N O P ON-VEHICLE REPAIR FRONT WIPER AND WASHER SYSTEM Removal and Installation INFOID:0000000001691134 FRONT WIPER ARMS Removal 1. Remove wiper arm covers and wiper arm nuts. 2. Remove front RH wiper arm and front LH wiper arm. 3. Remove front RH blade assembly and front LH blade assembly. Installation 1. Operate wiper motor one full cycle, then turn "OFF" (Auto Stop). 2. Clean up the pivot area as shown. This will reduce possibility of 3. Install front RH blade assembly and front LH blade assembly. 4. Install front RH wiper arm and front LH wiper arm. 5. Ensure that wiper blades stop within proper clearance. Refer to "FRONT WIPER ARM ADJUSTMENT". FRONT WIPER ARM ADJUSTMENT 1. Operate windshield washer and wiper motor one full cycle, then turn "OFF" (Auto Stop). 2. Lift the wiper blade up and then rest it onto glass surface, check 3. Remove wiper arm covers and wiper arm nuts. 4. Adjust front wiper arms on wiper motor pivot shafts to obtain 5. Tighten wiper arm nuts to specified torque, and install wiper arm WIPER MOTOR AND LINKAGE SEL024J Clearance "L1" : 24.5 - 39.5 mm (0.965 - 1.555 in) Clearance "L2" : 23.5 - 38.5 mm (0.925 - 1.516 in) Front wiper arm nuts : 23.6 N·m (2.4 kg-m, 17 ft-lb) SEL543TA |