|
|
TROUBLE DIAGNOSIS SRS-27 C D E F G I J K L M A B SRS 2006 Pathfinder NOTE: DIAGNOSTIC PROCEDURE 3 CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunction might be detected 1. After repairing SRS, connect both battery cables. 2. Connect CONSULT-II and CONSULT-II CONVERTER to data 3. Turn ignition switch ON. BELT TENSION SENS [UNIT FAIL] [B1019] ● Belt tension sensor is malfunctioning. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace RH front seat belt assem- bly. 4. Replace RH front seat cushion/ occupant classification system con- 5. Replace the related harness. PASS A/B INDCTR CKT [B1023] ● Front passenger air bag off indicator is malfunctioning. 1. Visually check the wiring harness connection. 2. Replace the harness if it has visible damage. 3. Replace front passenger air bag off indicator. 4. Replace the air bag diagnosis sen- sor unit. 5. Replace the related harness. FRONTAL COLLISION DETECTION [B1209] ● Driver and front passenger air bag modules are deployed. 1. Refer to SIDE COLLISION DETECTION [B1210] ● Side or curtain air bag modules are deployed (with side air 1. Refer to ROLLOVER DETECTION [B1211] ● Curtain air bag module and seat belt pre-tensioner are 1. Refer to Diagnostic item Explanation Repair order Recheck SRS at each replacement BBIA0538E |