|
|
OIL SEAL EM-91 C D E F G H I J K L M A EM 2006 Pathfinder Removal and Installation of Rear Oil Seal EBS00QC4 REMOVAL 1. Remove transmission assembly. Refer to AT-246, "TRANSMISSION ASSEMBLY" 2. Remove rear oil seal with a suitable tool. CAUTION: Be careful not to damage crankshaft and cylinder block. INSTALLATION 1. Apply new engine oil to new rear oil seal joint surface and seal lip. 2. Install rear oil seal so that each seal lip is oriented as shown. ● Press in rear oil seal to the position as shown. ● Install new rear oil seal using Tool. CAUTION: ● Be careful not to damage crankshaft and cylinder ● Press-fit oil seal straight to avoid causing burrs or tilt- ● Do not touch grease applied onto oil seal lip. 3. Installation of the remaining components is in the reverse order of removal. PBIC2932E SEM715A SBIA0281E Tool number : KV991J0120 (J-47128) LBIA0454E |