|
|
A/T FLUID AT-15 D E F G H I J K L M A B AT 2006 Pathfinder ● When the color of the ATF coming out of the auxiliary transmission oil cooler hose return line is about CAUTION: ● Use only Genuine NISSAN ATF and do not mix with other fluids. ● Using automatic transmission fluid other than Genuine NISSAN ATF will cause deterioration in ● When filling the transmission with ATF, do not spill the ATF on any heat generating parts such ● Do not reuse the drain plug gasket. 5. Drive the vehicle to warm up the ATF to approximately 80 ° C (176 ° F). 6. Install the ATF level gauge and tighten the ATF level gauge bolt to specification. 7. Check the fluid level and condition. If the ATF is still dirty, repeat 8. Install the ATF level gauge in the charging pipe and install the ATF level gauge bolt. 9. Tighten the ATF level gauge bolt to specification. A/T Fluid Cooler Cleaning ECS00EEL Whenever an A/T is repaired, overhauled, or replaced, the A/T fluid cooler mounted in the radiator must be A/T FLUID COOLER CLEANING PROCEDURE 1. Position a drain pan under the A/T inlet and outlet fluid cooler tube to cooler hose connection. 2. Put a different color matching mark on each cooler tube to cooler hose connection to aid in assembly. CAUTION: Use paint to make the matching mark. Do not damage the tubes or hose. ATF type and capacity : Refer to MA-11, "Fluids and Lubricants" ATF level gauge bolt : Refer to . LLIA0071E ATF level gauge bolt |