|
|
FRONT DOOR GLASS AND REGULATOR GW-47 C D E F G H J K L M A B GW
2005 Pathfinder 7. Install front door finisher. Refer to . SETTING AFTER INSTALLATION If any of the following work has been done, set the limit switch (integrated in the motor). ● Removal and installation of the regulator. ● Removal and installation of the motor from the regulator. ● Removal and installation of the glass. ● Removal and installation of the glass run. Resetting After installing each component, perform the following procedure to reset the limit switch. 1. Raise the glass to the top position. 2. While pressing and holding the reset switch, lower the glass to 3. Release the reset switch. Verify that the reset switch returns to 4. Raise the glass to the top position. CAUTION: Do not operate the glass automatically to raise the glass to the SIIA0347E |