|
|
FRONT DOOR GLASS AND REGULATOR GW-17 < REMOVAL AND INSTALLATION > C D E F G H I J L M A B GW N O P The arrows in the figure show the application points of the suitable multi-purpose grease, if needed. Installation 1. Install the power window motor to the front door glass regulator (if necessary). Refer to 2. Install the regulator assembly into the door and secure regulator assembly with the nuts and bolt. 3. Install the front door glass into the door and align with the front door glass regulator, then install the front door regulator to glass bolts. 4. Raise the front door glass to the top position. CAUTION: Do not operate the front door glass automatically to raise the front door glass to the top. 5. Reposition the vapor barrier. INT-15, "Removal and Installation" . If any of the following work has been done, reset the power window motor limit switch. • Removal and installation of the front door glass regulator. • Removal and installation of the power window motor from the regulator. • Installation of a new front door glass. • Installation of a new front door glass rear run channel. AWKIA1992ZZ Front door glass regulator nuts and bolts : 7.5 N·m (0.77 kg-m, 66 in-lb) Front door regulator to glass bolts : 6.1 N·m (0.62 kg-m, 54 in-lb) |