|
|
EXL-116 < DTC/CIRCUIT DIAGNOSIS > FRONT FOG LAMP CIRCUIT 3. CHECK FRONT FOG LAMP OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect IPDM E/R harness connector E217. 3. Check continuity between the IPDM E/R harness connector E217 and the front fog lamp harness connec- tor E305 or E306. Is the inspection result normal? YES >> Replace IDPM E/R. Refer to PCS-32, "Removal and Installation" NO >> Repair or replace the harness or connector. 4. CHECK FRONT FOG LAMP GROUND CIRCUIT 1. Turn the ignition switch OFF. 2. Check continuity between the front fog lamp harness connector E305 or E306 terminal 2 and ground. Is the inspection result normal? YES >> Inspect the fog lamp bulb. NO >> Repair or replace the harness or connector. IPDM E/R Front fog lamp Continuity Connector Terminal Connector Terminal LH E217 79 E305 1 Yes RH 78 E306 Connector Terminal — Continuity LH E305 2 Ground Yes RH E306 |