|
|
DLK-190 < DTC/CIRCUIT DIAGNOSIS > UNLOCK SENSOR Is the inspection result normal? YES >> Replace BCM. Refer to BCS-80, "Removal and Installation" NO >> Repair or replace harness. 3. CHECK UNLOCK SENSOR GROUND CIRCUIT Check continuity between front door lock assembly LH harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK UNLOCK SENSOR DLK-190, "Component Inspection" . Is the inspection result normal? YES >> GO TO 5. NO >> Replace front door lock assembly LH. Refer to DLK-301, "DOOR LOCK : Removal and Installa- . 5. CHECK INTERMITTENT INCIDENT GI-49, "Intermittent Incident" >> Inspection End. Component Inspection INFOID:0000000009175737 1. CHECK UNLOCK SENSOR 1. Turn ignition switch OFF. 2. Disconnect front door lock assembly LH connector. 3. Check continuity between front door lock assembly LH terminals. Is the inspection result normal? YES >> Inspection End. NO >> Replace front door lock assembly LH. Refer to DLK-301, "DOOR LOCK : Removal and Installa- . Front door lock assembly LH Ground Continuity Connector Terminal D14 4 Yes Front door lock assembly LH Condition Continuity Terminal 3 4 Driver side door Unlock Yes Lock No |