|
|
Content .. 1212 1213 1214 1215 ..
WT-38 < DTC/CIRCUIT DIAGNOSIS > C1712, C1713, C1714, C1715 TRANSMITTER (CHECKSUM) C1712, C1713, C1714, C1715 TRANSMITTER (CHECKSUM) DTC Logic INFOID:0000000009177439 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PERFORM SELF DIAGNOSTIC RESULT With CONSULT 1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. 2. Perform Self Diagnostic Result. YES >> Proceed to . NO >> Inspection End. Diagnosis Procedure INFOID:0000000009177440 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs 1. TIRE PRESSURE SENSOR ID REGISTRATION Perform tire pressure sensor ID registration. Refer to . Can the tire pressure sensor ID registration be completed? YES >> GO TO 2. NO >> Replace applicable tire pressure sensor. Refer to WT-61, "Removal and Installation" 2. PERFORM SELF DIAGNOSTIC RESULT With CONSULT 1. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. 2. Perform Self Diagnostic Result. CONSULT Display DTC Detection Condition Possible Cause [CHECKSUM - ERR] - FL Checksum data signal from front LH wheel sensor • ID registration incomplete [CHECKSUM - ERR] - FR Checksum data signal from front RH wheel sensor [CHECKSUM - ERR] - RR Checksum data signal from rear RH wheel sensor [CHECKSUM - ERR] - RL Checksum data signal from rear LH wheel sensor |