|
|
Content .. 998 999 1000 1001 ..
SB-18 < REMOVAL AND INSTALLATION > THIRD ROW SEAT BELT 3. Remove the back pillar finisher. Refer to INT-32, "BACK PILLAR FINISHER : Removal and Installation" . 4. Remove the D-ring anchor bolt. CAUTION: Before removing the D-ring anchor bolt, note the positions of washers and spacers for correct installation. 5. Remove the seat belt retractor bolts and the seat belt retractor. Installation Installation is in the reverse order of removal. • Tighten the D-ring anchor bolt, seat belt lower anchor bolt, and the seat belt retractor bolts to specification. • Make sure the D-ring anchor operates freely. • Always perform an inspection after repair to make sure the system is functioning within specifications. Refer SEAT BELT BUCKLE Removal 1. Open the storage box lid (1). assembly (2). 3. Remove the seat belt buckle anchor bolt (A). : Front 4. Route the seat belt buckle (1) through the opening in the seat cushion trim and remove. Installation Installation is in the reverse order of removal. • Tighten the seat belt buckle anchor bolt to specification. • Always perform an inspection after repair to make sure the system is functioning within specifications. Refer ALHIA0242ZZ ALHIA0240GB |