Nissan Pathfinder. Manual - part 42

 

  Index      Nissan     Nissan Pathfinder (2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  40  41  42  43   ..

 

 

Nissan Pathfinder. Manual - part 42

 

 

ADP-160

< SYMPTOM DIAGNOSIS >

NORMAL OPERATING CONDITION

NORMAL OPERATING CONDITION

Description

INFOID:0000000009176671

The following symptoms are normal operations, and they do not indicate a malfunction.

Symptom

Cause

Action to take

Reference page

Entry/exit assist function do not 
operate. 

No initialization has been performed.

Perform initialization.

ADP-73

Entry/exit assist function is disabled.
NOTE:
Entry/exit assist function is set to ON be-
fore delivery (initial setting).

Change the settings.

ADP-75

Entry assist function does not op-
erate.

Manual operation with power seat switch 
was performed after exit assist function 
execution.

Perform the entry as-

sist function.

ADP-22

Memory function, entry/exit as-
sist function, or Intelligent Key in-
terlock function does not 
operate.

The operating conditions are not fulfilled.

Fulfill the operation 

conditions.

Memory function:

ADP-18

Entry assist function: 

ADP-22

Exit assist function: 

ADP-20

Intelligent Key interlock 

function: 

ADP-24

DRIVER SEAT CONTROL UNIT

ADP-161

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

REMOVAL AND INSTALLATION

DRIVER SEAT CONTROL UNIT

Removal and Installation

INFOID:0000000009176672

REMOVAL

1. Remove the driver seat. Refer to 

SE-86, "Removal and Installation"

.

2. Remove the two driver seat control unit screws (A).

: Front

3. Disconnect the two harness connectors from driver seat control

unit (1).

4. Remove the driver seat control unit (1).

INSTALLATION

Installation is in the reverse order of removal.

NOTE:

After installing the driver seat, perform additional service when replacing control unit. Refer to 

ADP-73, "ADDI-

TIONAL SERVICE WHEN REPLACING CONTROL UNIT : Work Procedure"

.

ALJIA0784ZZ

ADP-162

< REMOVAL AND INSTALLATION >

AUTOMATIC DRIVE POSITIONER CONTROL UNIT

AUTOMATIC DRIVE POSITIONER CONTROL UNIT

Removal and Installation

INFOID:0000000009176673

REMOVAL

1. Disconnect the negative battery terminal. Refer to 

PG-90, "Removal and Installation"

.

2. Remove the A/C assembly switch. Refer to 

HAC-155, "Removal and Installation - With Navigation"

 or

HAC-154, "Removal and Installation - Without Navigation"

.

3. Remove the automatic drive positioner control unit screw (A).
4. Disconnect the two harness connectors from the automatic drive

positioner control unit (1).

5. Remove automatic drive positioner control unit (1).

INSTALLATION

Installation is in the reverse order of removal.

NOTE:

After installing the automatic drive positioner control unit, perform additional service. Refer to 

ADP-73, "ADDI-

TIONAL SERVICE WHEN REPLACING CONTROL UNIT : Work Procedure"

ALMIA0570ZZ

SEAT MEMORY SWITCH

ADP-163

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

SEAT MEMORY SWITCH

Removal and Installation

INFOID:0000000009176674

REMOVAL

1. Remove front door finisher LH. Refer to 

INT-15, "Removal and Installation"

.

2. Release the pawls using a suitable tool (A) and remove seat

memory switch (2) from switch finisher (1).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

AWJIA0826ZZ

 

 

 

 

 

 

 

Content   ..  40  41  42  43   ..