|
|
ADP-8 < SYSTEM DESCRIPTION > COMPONENT PARTS Component Description INFOID:0000000009176521 1. Push-button ignition switch 2. BCM (view with instrument panel re- 3. TCM 4. A. ADP steering switch (if equipped) 5. A. Driver seat control unit 6. Automatic drive positioner control 7. Door mirror LH (RH similar) 8. Power mirror remote control switch 9. Seat memory switch Component parts Description Driver seat control unit • Main units of automatic drive positioner system. UART communication. • It performs memory function after receiving the door unlock sig- nal from BCM. • Operates each motor of seat to the registered position. automatic drive positioner control unit • Operates the specific seat motor with the signal from power seat switch. • Transmits the ignition switch signal (ACC/ON) via UART com- munication to automatic driver positioner control unit. Automatic drive positioner control unit • It communicates with driver seat control unit via UART commu- nication. • Performs various controls with the instructions of driver seat control unit. • Performs the controls of tilt & telescopic (if equipped), door mir- ror and seat memory switch. • Operates steering column (if equipped) and door mirror with the signal from the driver seat control unit BCM Recognizes the following status and transmits it to driver seat con- quest switch operation) • Key ID TCM The following signals are transmitted to driver seat control unit via Combination meter Transmits the vehicle speed signal to driver seat control unit via CVT shift selector (Detention switch) • Detention switch is installed on CVT shift selector. It is turned OFF when CVT shift selector is in P position. • Driver seat control unit judges that CVT shift selector is in P po- sition if continuity does not exist in this circuit. |