|
|
![]() EXL-34 < FUNCTION DIAGNOSIS > [XENON TYPE] DIAGNOSIS SYSTEM (IPDM E/R) CONSULT-III Function (IPDM E/R) INFOID:0000000003894260 APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with IPDM E/R. SELF DIAGNOSTIC RESULT DATA MONITOR Monitor item Cooling fan does not operate Perform auto active test. YES • ECM signal input circuit between ECM and IPDM E/ NO • Harness or connector be- tween IPDM E/R and cool- • Harness or connector be- tween IPDM E/R and cool- • Cooling fan motor Symptom Inspection contents Possible cause Diagnosis mode Description Ecu Identification Allows confirmation of IPDM E/R part number. Self Diagnostic Result Displays the diagnosis results judged by IPDM E/R. Data Monitor Displays the real-time input/output data from IPDM E/R input/output data. Active Test IPDM E/R can provide a drive signal to electronic components to check their operations. CAN Diag Support Monitor The results of transmit/receive diagnosis of CAN communication can be read. Monitor Item [Unit] MAIN SIG- NALS Description MOTOR FAN REQ × Displays the value of the cooling fan speed request signal received from ECM via AC COMP REQ × Displays the status of the A/C compressor request signal received from ECM via TAIL&CLR REQ × Displays the status of the position light request signal received from BCM via CAN HL LO REQ × Displays the status of the low beam request signal received from BCM via CAN HL HI REQ × Displays the status of the high beam request signal received from BCM via CAN FR FOG REQ × Displays the status of the front fog light request signal received from BCM via FR WIP REQ × Displays the status of the front wiper request signal received from BCM via CAN WIP AUTO STOP × Displays the status of the front wiper auto stop signal judged by IPDM E/R. WIP PROT × Displays the status of the front wiper fail-safe operation judged by IPDM E/R. IGN RLY1 -REQ Displays the status of the ignition switch ON signal received from BCM via CAN |