|
|
WCS WARNING CHIME SYSTEM WCS-9 < SYSTEM DESCRIPTION > C D E F G H I J K L M B A O P With ignition switch turned ON and driver seat belt unfastened, seat belt warning chime will sound for approxi- (driver side) and transmits it to the BCM via CAN communication. • The BCM receives seat belt buckle switch signal (driver side) from combination meter via CAN communica- tion. • The BCM detects seat belt reminder warning based on the received signal and transmits the buzzer output signal to combination meter via CAN communication. • The combination meter receives the buzzer output signal from BCM via CAN communication and sounds the warning buzzer. WARNING OPERATION CONDITIONS If all of the following conditions are fulfilled, the warning buzzer will sound. WARNING CANCEL CONDITIONS Warning is canceled if any of the following conditions are fulfilled. PARKING BRAKE RELEASE WARNING CHIME PARKING BRAKE RELEASE WARNING CHIME : System Diagram INFOID:0000000007565172 PARKING BRAKE RELEASE WARNING CHIME : System Description INFOID:0000000007565173 DESCRIPTION Parking brake release warning chime judges the remaining parking brake according to the vehicle speed sig- WARNING OPERATION CONDITIONS If all of the following conditions are fulfilled. • Vehicle speed is 7 km/h (4.3 MPH) or higher WARNING CANCEL CONDITIONS Warning is canceled if any of the following conditions are fulfilled. • Vehicle speed is approximately 3 km/h (1.9 MPH) or less KEY WARNING CHIME JPNIA0751GB Revision: 2013 February 2012 Murano CrossCabriolet |