|
|
CHG S TERMINAL CIRCUIT CHG-25 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J K L B A O P N S TERMINAL CIRCUIT Description INFOID:0000000007565945 The output voltage of the alternator is controlled by the IC voltage regulator at the “S” terminal detecting the Diagnosis Procedure INFOID:0000000007565946 1. CHECK “S” TERMINAL CONNECTION 1. Turn ignition switch OFF. 2. Check if “S” terminal is clean and tight. Is the inspection result normal? YES >> GO TO 2. NO >> Repair “S” terminal connection. Confirm repair by performing complete Charging system test using EXP-800 NI or GR8-1200 NI (if available). Refer to the applicable Instruction Manual for 2. CHECK “S” TERMINAL CIRCUIT Check voltage between alternator harness connector and ground. Is the inspection result normal? YES >> Refer to CHG-11, "Work Flow (With EXP-800 NI or GR8-1200 NI)" out EXP-800 NI or GR8-1200 NI)" . NO >> Check harness for open between alternator and fuse. Terminals Voltage (Approx.) (+) (–) Alternator harness connector Terminal F60 4 Ground Battery voltage Revision: 2013 February 2012 Murano CrossCabriolet |