|
|
BR-24 < REMOVAL AND INSTALLATION > BRAKE PIPING REAR : Hydraulic Piping INFOID:0000000007543264 REAR : Removal and Installation INFOID:0000000007543265 REMOVAL CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it 1. Remove tires with power tool. 2. Drain brake fluid. Refer to 3. Loosen the flare nut with a flare nut wrench and separate the brake tube from the hose. CAUTION: • Never scratch the flare nut and the brake tube. 4. Remove the union bolt and copper washers, and remove the brake hose from the brake caliper assembly. 5. Remove the lock plate and remove the brake hose from the vehicle. INSTALLATION CAUTION: Never spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it 1. Assemble the union bolt and the copper washers to the brake hose. CAUTION: Never reuse copper washer. 1. Brake tube 2. Lock plate 3. Brake hose 4. Union bolt 5. Copper washer A. To connector B. To rear brake hose C. To brake tube Refer to for symbols in the figure. 1. ABS actuator and electric unit (con- 2. Front disc brake 3. Master cylinder assembly 4. Brake booster 5. Connector 6. Rear disc brake A. Brake tube B. Brake hose : Flare nut : Union bolt JPFIA0456ZZ Revision: 2013 February 2012 MURANO |