|
|
GW-12 WINDSHIELD GLASS Revision: 2006 July 2007 Murano WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help pre- CAUTION: ● When a windshield glass is to be reused, do not use a cutting knife or power cutting tool. ● Be careful not to scratch the glass when removing. ● Do not set or stand the glass on its edge. Small chips may develop into cracks. 6. Remove the wind shield glass, using suction lifter. INSTALLATION ● Use a genuine Nissan Urethane Adhesive Kit (if available) or equivalent and follow the instructions fur- ● While the urethane adhesive is curing, open a door window. This will prevent the glass from being forced ● The molding must be installed securely so that it is in position and leaves no gap. ● Inform the customer that the vehicle should remain stationary until the urethane adhesive has completely WARNING: ● Keep heat and open flames away as primers and adhesive are flammable. ● The materials contained in the kit are harmful if swallowed, and may irritate skin and eyes. Avoid ● Use in an open, well ventilated location. Avoid breathing the vapors. They can be harmful if ● Driving the vehicle before the urethane adhesive has completely cured may affect the perfor- CAUTION: ● Do not use an adhesive which is past its usable term. Shelf life of this product is limited to six ● Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator. ● Do not leave primers or adhesive cartridge unattended with their caps open or off. ● The vehicle should not be driven for at least 24 hours or until the urethane adhesive has com- Repairing Water Leaks for Windshield Leaks can be repaired without removing and reinstalling glass. PIIA0186E |