Nissan Murano Z50 (2007 year). Manual - part 23

IMMU

NATS malfunction

Check NATS.

BL-232

Monitor item

Content

PUSH SW

Indicates [ON/OFF] condition of ignition knob switch.

KEY SW

Indicates [ON/OFF] condition of key switch.

DR REQ SW

Indicates [ON/OFF] condition of door request switch (driver side).

AS REQ SW

Indicates [ON/OFF] condition of door request switch (passenger side).

BD/TR REQ SW

Indicates [ON/OFF] condition of back door opener request switch.

IGN SW

Indicates [ON/OFF] condition of ignition switch in ON position.

ACC SW

Indicates [ON/OFF] condition of ignition switch in ACC position.

DOOR STAT SW

Indicates [ON/OFF] condition of stop lamp switch.

STOP LAMP SW

Indicates [ON/OFF] condition of door unlock sensor.

P RANGE SW

Indicates [ON/OFF] condition of park position switch.

BD OPEN SW

Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communication line.

DOOR LOCK SIG*

Indicates [ON/OFF] condition of door lock signal from Intelligent Key remote controller button.

DOOR UNLOCK SIG*

Indicates [ON/OFF] condition of door unlock signal from Intelligent Key remote controller button.

PANIC SIG*

Indicates [ON/OFF] condition of panic alarm signal from Intelligent Key remote controller button.

DOOR SW DR*

Indicates [OPEN/CLOSE] condition of front door switch driver side from BCM via CAN communica-
tion line.

DOOR SW AS*

Indicates [OPEN/CLOSE] condition of front door switch passenger side from BCM via CAN commu-
nication line.

DOOR SW RR*

Indicates [OPEN/CLOSE] condition of rear door switch LH from BCM via CAN communication line.

DOOR SW RL*

Indicates [OPEN/CLOSE] condition of rear door switch RH from BCM via CAN communication line.

DOOR BK SW*

Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communication line.

INTELLIGENT KEY SYSTEM

BL-125

Revision: 2006 July

2007 Murano

WORK SUPPORT

Monitor item

Description

CONFIRM KEY FOB ID

It can be checked whether Intelligent Key ID code is registered or not in this mode.

TAKE OUT FROM WINDOW
WARN

Take away warning chime (from window) mode can be changed to operate (ON) or not operate
(OFF) with this mode. The operation mode will be changed when “CHANGE SETT” on CON-
SULT-II screen is touched.

LOW BAT OF KEY FOB WARN

Intelligent Key low battery warning mode can be changed to operate (ON) or not operate (OFF)
with this mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II
screen is touched.

SELECTIVE UNLOCK FUNC-
TION

Selective unlock function mode can be changed to operate (ON) or not operate (OFF) with this
mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is
touched.

ANTI KEY LOCK IN FUNCTION

Key reminder function mode can be changed to operate (ON) or not operate (OFF) with this
mode. The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is
touched.

HORN WITH KEYLESS LOCK

Horn reminder function mode by Intelligent Key remote control button can be changed to operate
(ON) or not operate (OFF) with this mode. The operation mode will be changed when “CHANGE
SETT” on CONSULT-II screen is touched.

HAZARD ANSWER BACK

Hazard reminder function mode can be selected from the following with this mode. The operation
mode will be changed when “CHANGE SETT” on CONSULT-II screen is touched.

●

LOCK ONLY: Door lock operation only

●

UNLOCK ONLY: Door unlock operation only

●

LOCK/UNLOCK: Lock/Unlock operation

●

OFF: Non-operation

ANSWER BACK WITH I-KEY
LOCK

Horn reminder function (lock operation) mode by door request switch (driver side, passenger side
and back door) can be selected from the following with this mode. The operation mode will be
changed when “CHANGE SETT” on CONSULT-II screen is touched.

●

HORN CHIRP: Sound horn

●

BUZZER: Sound buzzer

●

OFF: Non-operation

ANSWER BACK WITH I-KEY
UNLOCK

Horn reminder function (unlock operation) mode by door request switch can be changed to oper-
ate (ON) or not operate (OFF) with this mode.

AUTO RELOCK TIMER

Auto door lock timer mode can select the following with this mode.

●

1 minute

●

5 minute

●

OFF: Non-operation

PANIC ALARM DELAY

Panic alarm button's pressing time on Intelligent Key remote control button can be selected from
the following with this mode. The operation mode will be changed when “CHANGE SETT” on
CONSULT-II screen is touched.

●

0.5 second

●

1.5 second

●

OFF: Non-operation

P/W DOWN DELAY

Unlock button's pressing time on Intelligent Key remote control button can be selected from the
following with this mode. The operation mode will be changed when “CHANGE SETT” on CON-
SULT-II screen is touched.

●

3 seconds

●

5 seconds

●

OFF: Non-operation

ENGINE START BY I-KEY

Engine start function mode can be changed to operate (ON) or not operate (OFF) with this mode.
The operation mode will be changed when “CHANGE SETT” on CONSULT-II screen is touched.

LOCK/UNLOCK BY I-KEY

Door lock/unlock function by door request switch (driver side, passenger side and back door)
mode can be changed to operate (ON) or not operate (OFF) with this mode. The operation mode
will be changed when “CHANGE SETT” on CONSULT-II screen is touched.

BL-126

INTELLIGENT KEY SYSTEM

Revision: 2006 July

2007 Murano

ACTIVE TEST

Test item

Description

DOOR LOCK/UNLOCK

This test is able to check door lock/unlock operation.

●

The all door lock actuators are unlocked when “ALL UNLK” on CONSULT-II screen is touched.

●

The door lock actuator (driver side) is unlocked when “DR UNLK” on CONSULT-II screen is touched.

●

The door lock actuator (passenger side) is unlocked when “AS UNLK” on CONSULT- II screen is touched.

●

The door lock actuator (back door) is unlocked when “BK UNLK” on CONSULT- II screen is touched.

●

The all door lock actuators are locked when “LOCK” on CONSULT-II screen is touched.

OUTSIDE BUZZER

This test is able to check Intelligent Key warning buzzer (engine room) operation.
Intelligent Key warning buzzer (engine room) sounds when “ON” on CONSULT-II screen is touched.

INSIDE BUZZER

This test is able to check Intelligent Key warning buzzer (inside) operation.

●

Take away warning chime sounds when “TAKE OUT” on CONSULT-II screen is touched.

●

Ignition switch warning chime sounds when “KNOB” on CONSULT-II screen is touched.

●

Ignition key warning chime sounds when “KEY” on CONSULT-II screen is touched.

INDICATOR

This test is able to check warning lamp operation.

●

“KEY” Warning lamp (Green) illuminates when “BLUE ON” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (Red) illuminates when “RED ON” on CONSULT-II screen is touched.

●

“P-SHIFT” Warning lamp illuminates when “KNOB ON” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (Green) flashes when “BLUE IND” on CONSULT-II screen is touched.

●

“KEY” Warning lamp (RED) flashes when “BLUE IND” on CONSULT-II screen is touched.

●

“P-SHIFT” Warning lamp flashes when “KNOB ON” on CONSULT-II screen is touched.

INTELLIGENT KEY SYSTEM

BL-127

Revision: 2006 July

2007 Murano

Trouble Diagnosis Symptom Chart

NIS0017Q

KEY WARNING LAMP ILLUMINATES GREEN

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/Service procedure” col-
umn in this order.

Conditions of Vehicle (Operating Conditions)

●

Intelligent Key is registered.

●

Key is not inserted in ignition switch.

●

One or more registered Intelligent Keys are in the vehicle.

KEY WARNING LAMP ILLUMINATES RED

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/Service procedure” col-
umn in this order.

Conditions of Vehicle (Operating Conditions)

●

Intelligent Key is registered.

●

Key is not inserted in ignition switch.

●

One or more registered Intelligent Keys are in the vehicle.

Symptom

Diagnosis/Service procedure

Reference page

Ignition switch does not turn on with Intelligent Key.
[KEY warning lamp (green) illuminates.]

1. Check steering lock unit.

BL-156

2. Replace Intelligent Key unit.

Symptom

Diagnosis/Service procedure

Reference page

Ignition switch does not turn on with Intelligent Key.
[KEY warning lamp (red) illuminates.]

1. Check inside key antenna.

BL-155

2. Replace Intelligent Key unit.

BL-128

INTELLIGENT KEY SYSTEM

Revision: 2006 July

2007 Murano

KEY WARNING LAMP DOES NOT ILLUMINATE

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/Service procedure” col-
umn in this order.

●

Check if ignition switch turns using mechanical key. If it turns, check if “ENGINE START BY I-KEY” in
“WORK SUPPORT” mode is ON.

Conditions of Vehicle (Operating Conditions)

●

Intelligent Key is registered.

●

Key is not inserted in ignition switch.

●

One or more registered Intelligent Keys are in the vehicle.

SELF-DIAGNOSIS RESULTS ARE NOT DISPLAYED

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to

●

Make sure that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis,
and check each symptom.

●

If the following “symptoms” are detected, check systems shown in the “Diagnoses/Service procedure” col-
umn in this order.

Conditions of Vehicle (Operating Conditions)

●

ID-registered mechanical key is used.

●

Multiple mechanical keys are not set in a keyfob.
(If mechanical keys are near the ignition switch, the operation may not work properly.)

ENGINE START CONDITION CHECK

NOTE:

●

Before performing the diagnosis in the following table, check “Trouble Diagnosis Procedure”. Refer to

●

If the following “symptoms” are detected, check systems shown in the ”Diagnoses/Service procedure” col-
umn in this order.

Symptom

Diagnosis/Service procedure

Reference page

Ignition switch does not turn on with Intelligent Key.
[KEY warning lamp does not illuminate.]

Check Intelligent Key unit power supply and ground
circuit.

BL-134

Check ignition knob switch.

BL-137

Check key switch.

BL-135

Replace Intelligent Key unit.