|
|
GW-32 POWER WINDOW SYSTEM Revision: 2004 November 2004 Murano 7. Select diagnosis mode. ACTIVE TEST WORK SUPPORT DATA MONITOR SEL274W Test Item Description RETAINED PWR This test is able to supply RAP signal (power) from BCM (body control module) to power window NOTE: POWER WINDOW DOWN This test able to transmitted of power window down signal from BCM to power window main switch Work item Description RETAINED PWR RAP signal’s power supply period can be changed by mode setting. Selects RAP signal’s power ● MODE1 (45 sec.) / MODE2 (OFF) / MODE 3 (2 min.). Work item Description IGN ON SW Indicates (ON / OFF) condition of ignition switch DOOR SW–DR Indicates (ON / OFF) condition of front door switch driver side DOOE SW–AS Indicates (ON / OFF) condition of front door switch passenger side LOCK SW DR/AS Indicates (ON / OFF) condition of lock signal from lock and unlock switch on power window main UNLK SW DR/AS Indicates (ON / OFF) condition of unlock signal from lock and unlock switch on power window KEY CYL LK-SW Indicates (ON / OFF) condition of lock signal from key cylinder. KEY CYL UN-SW Indicates (ON / OFF) condition of unlock signal from key cylinder. |