|
|
RFD-24 REAR FINAL DRIVE ASSEMBLY Revision; 2004 April 2003 Murano h. Remove dummy cover set, and remove differential case assembly. i. Remove pinion nut, pinion front bearing inner race, and remove 5. Install the drive pinion gear with a collapsible spacer to the gear 6. Using a drift and press stand, press the pinion front bearing 7. Apply anti-corrosive oil to the thread and seat of the pinion nut, CAUTION: Do not reuse the pinion nut. 8. Fit a drive pinion socket onto the drive pinion gear spline. Using CAUTION: ● Do not reuse the pinion nut. ● Adjust the lower limit of the pinion nut tightening torque ● If the preload torque exceeds the specified value, replace ● After adjustment, rotate the drive pinion gear back and forth SDIA0576E Tool number A: KV40100610 (J26089) B: ST38220000 ( – ) C: ST23860000 ( – ) PDIA0057E Tool number A: KV38108400 ( – ) B: KV38108500 ( – ) C: ST3127S000 (J25765-A) Pinion nut tightening torque: : 181 - 361 N·m (19 - 36 kg-m, 134 - 266 ft-lb) Pinion bearing preload: : 0.69 - 1.17 N·m (0.07 - 0.11 kg-m, 7 - 10 in-lb) PDIA0058E |