|
|
DTC P0037, P0038, P0057, P0058 HO2S2 HEATER EC-175 C D E F G H I J K L M A EC Revision; 2004 April 2003 Murano DTC Confirmation Procedure ABS004BY NOTE: WITH CONSULT-II 1. Turn ignition switch “ON” and select “DATA MONITOR” mode with CONSULT-II. 2. Start engine and warm it up to the normal operating tempera- 3. Turn ignition switch “OFF” and wait at least 10 seconds. 4. Start the engine and keep the engine speed between 3,500 rpm 5. Let engine idle for one minute. 6. If 1st trip DTC is detected, go to EC-179, "Diagnostic Procedure" . WITH GST 1. Start engine and warm it up to the normal operating temperature. 2. Turn ignition switch “OFF” and wait at least 10 seconds. 3. Start the engine and keep the engine speed between 3,500 rpm and 4,000 rpm for at least one minute 4. Let engine idle for one minute. 5. Turn ignition switch “OFF” and wait at least 10 seconds. 6. Start the engine and keep the engine speed between 3,500 rpm and 4,000 rpm for at least one minute 7. Let engine idle for one minute. 8. Select “MODE 3” with GST. 9. EC-179, "Diagnostic Procedure" . ● When using GST, “DTC Confirmation Procedure” should be performed twice as much as when SEF176Y |