|
|
содержание .. 2137 2138 2139 2140 ..
TM-514 < SYSTEM DESCRIPTION > [CVT: RE0F10G] DIAGNOSIS SYSTEM (TCM) *: Not applicable but displayed. WORK SUPPORT *: This item does not use. Engine brake adjustment Check the degradation level of the CVT fluid. ELECTRIC OP DUTY (%) Displays the command signal value (duty) of the electric oil pump transmitted from E-OP DUTY MON (%) Monitors the status signal value (duty) transmitted from the electric oil pump and dis- ELECTRIC OP RELAY (On/Off) Displays the command status from TCM to the electric oil pump relay. E-OP RELAY MON (On/Off) Monitors the command status from TCM to the oil pump relay and displays the mon- CVT-B • Displays CVT fluid temperature count. CVT-A • Displays CVT fluid temperature count. G SENSOR (V) Displays the signal voltage of the G sensor. Monitored item (Unit) Remarks Item name Description CONFORM CVTF DETERIORTN Checks the degradation level of the CVT fluid under severe conditions. G SENSOR CALIBRATION Compensates the G sensor. ERASE LEARNING VALUE* Erases learning value memorized by TCM. ENGINE BRAKE ADJ. Although there is no malfunction on the transaxle and the CVT system, if a cus- ELECTRIC O.P. AIR BLEEDING Bleed air from the electric oil pump. WRITE IP CHARA - REPLACEMENT AT/CVT Writes IP characteristics when transaxle assembly is replaced. READ IP CHARA - REPLACEMENT TCM Reads IP characteristics when TCM is replaced. WRITE IP CHARA - REPLACEMENT TCM Writes IP characteristics when TCM is replaced. ENGINE BRAKE LEVEL ON : Turn ON the engine brake control. OFF : Turn OFF the engine brake control. CVTF degradation level data 210,000 or more : Replacement of the CVT fluid is required. Less than 210,000 : Replacement of the CVT fluid is not required. |