|
|
содержание .. 1777 1778 1779 1780 ..
FRONT SEAT BELT SB-15 < REMOVAL AND INSTALLATION > C D E F G I J K L M A B SB N O P 1. Remove front seat. Refer to SE-41, "Removal and Installation" . 2. Disconnect seat belt buckle harness connector and disengage harness clip. 3. Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle. Refer to INSTALLATION Install in the reverse order of removal. SEAT BELT BUCKLE : Inspection INFOID:0000000010927776 AFTER A COLLISION WARNING: Inspect all seat belt assemblies including retractors and attached hardware after any collision. les show no damage and continue to operate properly). • The seat belt is damaged in an accident (i.e. torn webbing, bent retractor or guide, etc.). distortion and repair if necessary before installing a new seat belt assembly. • Anchor bolts are deformed or worn out. which the air bags were deployed. PRELIMINARY CHECKS 1. Check the seat belt warning lamp for proper operation as per the following: a. Turn ignition switch ON. The seat belt warning lamp should illuminate. b. Fasten driver seat belt. The seat belt warning lamp should turn OFF. 2. If the air bag warning lamp turns ON, perform self-diagnosis using CONSULT. Refer to . 3. Check that the seat belt retractor, seat belt anchor and buckle bolts are tightened firmly. 4. Repeat steps above if necessary to check the other seat belts. |