|
|
содержание .. 1460 1461 1462 1463 ..
ROOM LAMP INL-85 < REMOVAL AND INSTALLATION > C D E F G H I J K M A B INL N O P • Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when REMOVAL 1. Apply protective tape (A) to room lamp housing for protecting it 2. Disengage lens fixing pawls using a remover tool (A), and then 3. Press metal clip using a remover tool (A) to disengage metal clips. 4. Pull downward room lamp housing, and then disengage room CAUTION: Never damage the headlining assembly. 5. Disconnect harness connector, and then remove room lamp housing. INSTALLATION Install in the reverse order of removal. Replacement INFOID:0000000010755171 CAUTION: • Disconnect the battery negative terminal or remove power circuit fuse when performing the opera- tion for preventing electric leakage. Refer to INL-4, "Precautions for Removing Battery Terminal" • Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre- venting damage to the bulb. • The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of the bulb with bare hands for preventing burns. • Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when ROOM LAMP BULB JMLIA3195ZZ : Pawl JMLIA3196ZZ : Pawl : Metal clip JMLIA1801ZZ |