|
|
содержание .. 117 118 119 120 ..
BRAKE MASTER CYLINDER BR-15 C D E G H I J K L M A B BR CAUTION: (Model with ESP/TCS/ABS) ● Do not damage and stain the rod of the primary piston. ● Do not reuse the O-ring seal, and primary piston. ● Apply silicon grease for the O-ring seal and primary piston. 3. Tighten brake tube flare nuts. 4. Refill with new brake fluid and bleed air from the brake piping. Disassembly and Assembly EFS002V3 DISASSEMBLY CAUTION: Remove master cylinder reservoir tank only when necessary. Using a slotted screwdriver as shown in the figure, lever stopper 2. Secure cylinder body flange in a vise as shown in the figure. CAUTION: ● Secure with chamfered pin insert hole on the cylinder ● When securing in the vise, use copper plates or cloth to 3. Using a pin punch [tool: diameter Approx. 4 mm (0.16 in)], 4. Remove master cylinder assembly from the vise. 5. Remove reservoir tank and grommet from the cylinder body. 6. Using a Phillips screwdriver, press and hold piston pin as shown 7. Carefully pull primary piston assembly straight out to prevent 8. Tap flange against a wood block to loosen secondary piston : 14.8 - 17.6 N·m (1.5 - 1.7 kg-m, 11 - 12 ft-lb) NBR386 BRA0031D MFIA0002E BRA0519D |