Juke F15 (2012 year). Service Repair Manual - part 70

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-113

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000006601284

CHECK DTC WITH BCM AND TCM

Check that DTC is not detected with BCM and TCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

NO-2

>> Refer to

TM-171, "DTC Index"

(RE0F10B models) or

TM-366, "DTC Index"

(RE0F11A models).

(TCM)

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.

Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 3.

DLK-79, "DRIVER SIDE : Component Function Check"

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.
Refer to

DLK-95, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY

Check Intelligent Key.
Refer to

DLK-91, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-114

< SYMPTOM DIAGNOSIS >

[TYPE 1]

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601286

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 3.

DLK-79, "DRIVER SIDE : Component Function Check"

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-104, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-99, "DRIVER SIDE : Component Function Check"

SUPER LOCK DOES NOT OPERATE

DLK-115

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

SUPER LOCK DOES NOT OPERATE

ALL DOOR

ALL DOOR : Diagnosis Procedure

INFOID:0000000006302825

CHECK SUPER LOCK ACTUATOR

Check front driver side super lock actuator.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-99, "DRIVER SIDE : Component Function Check"

DRIVER SIDE

DRIVER SIDE : Diagnosis Procedure

INFOID:0000000006302826

CHECK SUPER LOCK ACTUATOR

Check front driver side super lock actuator.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-100, "PASSENGER SIDE : Component Function Check"

PASSENGER SIDE

PASSENGER SIDE : Diagnosis Procedure

INFOID:0000000006302827

CHECK SUPER LOCK ACTUATOR

Check front passenger side super lock actuator.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-101, "REAR LH : Component Function Check"

REAR LH

DLK-116

< SYMPTOM DIAGNOSIS >

[TYPE 1]

SUPER LOCK DOES NOT OPERATE

REAR LH : Diagnosis Procedure

INFOID:0000000006302828

CHECK SUPER LOCK ACTUATOR

Check super lock actuator rear LH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-102, "REAR RH : Component Function Check"

REAR RH

REAR RH : Diagnosis Procedure

INFOID:0000000006302829

CHECK SUPER LOCK ACTUATOR

Check super lock actuator rear RH.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

ANTI-HIJACK FUNCTION DOES NOT OPERATE

DLK-117

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

ANTI-HIJACK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006609009

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to

Is the inspection result normal?

YES

>> GO TO 2

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-69, "Component Function Check"

DLK-118

< SYMPTOM DIAGNOSIS >

[TYPE 1]

BACK DOOR DOES NOT OPENED

BACK DOOR DOES NOT OPENED

Diagnosis Procedure

INFOID:0000000006601374

CHECK BACK DOOR OPENER SWITCH

Check back door opener switch.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Repair or replace the malfunctioning parts.

CHECK BACK DOOR OPENER ACTUATOR

Check back door opener actuator.
Refer to

DLK-67, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

CHECK VEHICLE SPEED SIGNAL

Check vehicle speed signal.
Refer to

MWI-46, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

DLK-119

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601287

CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “AUTO LOCK SET” in “WORK SUPPORT” mode.

Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

DLK-120

< SYMPTOM DIAGNOSIS >

[TYPE 1]

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPER-
ATE

Diagnosis Procedure

INFOID:0000000006601288

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

DLK-121

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601289

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

DLK-122

< SYMPTOM DIAGNOSIS >

[TYPE 1]

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPER-

ATE

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OP-
ERATE

Diagnosis Procedure

INFOID:0000000006609010

CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 2.

>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.

CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”

Select “DOOR LOCK” of “BCM” using CONSULT-III.

Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.

Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to

DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"

Is the inspection result normal?

YES

>> GO TO 4.

>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

DLK-123

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601290

CHECK DTC WITH BCM AND COMBINATION METER

Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

NO-2

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super

MWI-36, "DTC Index"

. (Combination meter)

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “HAZARD ANSWER BACK” in “WORK SUPPORT” mode.

Check the “HAZARD ANSWER BACK” in “WORK SUPPORT”.
Refer to

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.

CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “ANS BACK I-KEY LOCK” in “WORK SUPPORT” mode.

Check the “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.
Refer to

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super

Is the inspection result normal?

YES

>> GO TO 4.

>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.

CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT” mode.

Check the “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.
Refer to

EXL-72, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.

CHECK HAZARD FUNCTION

Check hazard function.
Refer to

Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to

DLK-92, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 7.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

DLK-124

< SYMPTOM DIAGNOSIS >

[TYPE 1]

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

KEY REMINDER FUNCTION DOES NOT OPERATE

DLK-125

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

KEY REMINDER FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601291

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super

CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”

Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

Select “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT” mode.

Check “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”.
Refer to

Is the inspection result normal?

YES

>> GO TO 3.

>> Set “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”.

CHECK DOOR SWITCH

Check door switch.
Refer to

DLK-104, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
• Instrument center: Refer to

DLK-55, "DTC Logic"

• Console: Refer to

DLK-57, "DTC Logic"

• Luggage room: Refer to

DLK-59, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to

Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

DLK-126

< SYMPTOM DIAGNOSIS >

[TYPE 1]

OFF POSITION WARNING DOES NOT OPERATE

OFF POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601292

CHECK DTC WITH BCM AND COMBINATION METER

Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

NO-2

MWI-36, "DTC Index"

. (Combination meter)

CHECK DOOR SWITCH

Check front door switch (driver side).
Refer to

WCS-40, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Refer to

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to

DLK-92, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to

P POSITION WARNING DOES NOT OPERATE

DLK-127

< SYMPTOM DIAGNOSIS >

[TYPE 1]

DLK

P POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000006601296

CHECK DTC WITH BCM, TCM AND COMBINATION METER

Check that DTC is not detected with BCM, TCM and combination meter.
Is the inspection result normal?

YES

>> GO TO 2.

NO-1

NO-2

>> Refer to

TM-171, "DTC Index"

(RE0F10B models) or

TM-366, "DTC Index"

(RE0F11A models).

(TCM)

NO-3

WCS-40, "Component Function Check"

MWI-36, "DTC Index"

. (Combination meter)

CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Refer to

Is the inspection result normal?

YES

>> GO TO 3.

>> Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to

DLK-92, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 4.

>> Repair or replace the malfunctioning parts.

CHECK DOOR SWITCH

Check front door switch (driver side).
Refer to

DLK-94, "Component Function Check"

Is the inspection result normal?

YES

>> GO TO 5.

>> Repair or replace the malfunctioning parts.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
• Instrument center: Refer to

DLK-55, "DTC Logic"

• Console: Refer to

DLK-57, "DTC Logic"

• Luggage room: Refer to

DLK-59, "DTC Logic"

Is the inspection result normal?

YES

>> GO TO 6.

>> Repair or replace the malfunctioning parts.

CHECK KEY WARNING LAMP

Check key warning lamp.
Refer to

Is the inspection result normal?

YES

>> GO TO 7.

>> Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

>> Check intermittent incident. Refer to