|
|
EXL-60 < DTC/CIRCUIT DIAGNOSIS > [XENON TYPE] TAIL LAMP CIRCUIT TAIL LAMP CIRCUIT Component Function Check INFOID:0000000012201646 1. CHECK TAIL LAMP OPERATION With CONSULT 1. Turn ignition switch ON. 2. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R” using CONSULT. 3. With operating the test items, check that the tail lamp is turned ON. Without CONSULT 1. Start IPDM E/R auto active test. Refer to PCS-12, "Diagnosis Description" 2. Check that the tail lamp is turned ON. YES >> Tail lamp circuit is normal. NO >> Refer to . Diagnosis Procedure INFOID:0000000012201647 1. CHECK FUSE 1. Turn ignition switch OFF. 2. Check that the following fuse is not blown (open). Is the fuse blown (open)? YES >> Replace the blown fuse after repairing the affected circuit if a fuse is blown (open). NO >> GO TO 2. 2. CHECK TAIL LAMP POWER SUPPLY With CONSULT 1. Turn ignition switch ON. 2. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R” using CONSULT. 3. With operating the test items, check voltage between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Replace IPDM E/R. Refer to PCS-37, "Removal and Installation" 3. CHECK TAIL LAMP POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. TAIL : Tail lamp ON Off : Tail lamp OFF Unit Location Fuse No. Capacity • Parking lamp RH IPDM E/R #47 10 A + - Test item Voltage IPDM E/R Connector Terminal E14 44 Ground EXTERNAL TAIL 9 – 16 V Off 0 – 1 V |