|
|
COMPONENT PARTS BRC-11 < SYSTEM DESCRIPTION > [WITH VDC] C D E G H I J K L M A B BRC N O P Component Description INFOID:0000000012199652 *1: Models with CVT *2: AWD models Wheel Sensor and Sensor Rotor INFOID:0000000012199653 NOTE: • Wheel sensor of front wheel is installed on steering knuckle. • Sensor rotor of front wheel is integrated in wheel hub and bearing assembly. • Wheel sensor of rear wheel is installed on wheel hub and bearing assembly. (2WD) • Wheel sensor of rear wheel is installed on axle housing. (AWD) • Sensor rotor of rear wheel is integrated in wheel hub and bearing assembly. (2WD) • Sensor rotor of rear wheel is integrated on drive shaft. (AWD) • Never measure resistance and voltage value using a tester because sensor is active sensor. A. Under floor carpet (front seat right B. Inside engine room C. Steering knuckle D. Brake pedal E. ABS warning lamp, brake warning F. Back of spiral cable assembly G. Rear axle housing Component Reference/Function ABS actuator and electric unit (control unit) BRC-12, "ABS Actuator and Electric Unit (Control Unit)" Wheel sensor BRC-11, "Wheel Sensor and Sensor Rotor" Stop lamp switch Brake pedal position switch BRC-13, "Brake Pedal Position Switch" Steering angle sensor BRC-13, "Steering Angle Sensor" Yaw rate/side/decel G sensor BRC-13, "Yaw Rate/Side/Decel G Sensor" VDC OFF switch Brake fluid level switch BRC-13, "Brake Fluid Level Switch" Parking brake switch BRC-13, "Parking Brake Switch" VDC warning lamp ABS warning lamp Brake warning lamp VDC OFF indicator lamp ECM Mainly transmits the following signals to ABS actuator and elec- TCM *1 Mainly transmits the following signals to ABS actuator and elec- AWD control module *2 Mainly transmits the following signals to ABS actuator and elec- |