|
|
Other Maintenance Items 1 Note: When adding coolant additive, do not exceed the Replace the air inlet foam filter. Every 45,000 mi Inspect the accessory drive belt or belts. 4 At 90,000 mi Change the rear axle fluid. See Special Operating Conditions Scheduled Maintenance (page 329). 5 At 100,000 mi Change the automatic transmission fluid and filter. Consult Every 150,000 mi Replace the accessory drive belt or belts if not replaced Replace the front wheel bearings and seals. Change the engine and secondary cooling system coolant. 6 At 200,000 mi 1 You can perform these maintenance items within 3,000 mi (4,800 km) of the last oil change. Do not exceed the designated distance for the interval. 2 Every 22,000 mi (36,000 km) or as indicated by the information display. 3 Every 30,000 mi (48,000 km), 1200 engine hours or as indicated by the information display. 4 Perform follow-up inspections every 15,000 mi (24,000 km) after the initial inspection. Replace the belt or belts at 150,000 mi (240,000 km). 5 Change the fluid again at 150,000 mi (240,000 km). 6 Initial replacement at 10 years or 200,000 mi (320,000 km), then every five years or 100,000 mi (160,000 km). 328 Scheduled Maintenance |