|
|
B-Pillar and Reinforcement — 4-Door Materials Specification Name WSS-M11P57-A5 Windshield Adhesive Kit General Equipment Air Body Saw General Equipment Hot Air Gun Metal Inert Gas (MIG) Welding Equipment Resistance Spotwelding Equipment Spot weld drill Bit Removal NOTE: Equipment: Measurement and alignment angle system 1. WARNING: High-strength steel (Usibor • A suitably powerful resistance spot welding device with inverter technology must be • The B-pillar reinforcement is made of high-strength steel plate (Usibor 1500). • A partial replacement of the B-pillar reinforcement is not permissible. The • Due to its strength, the B-pillar reinforcement can not always be worked on with • Additional preparations are required for MIG puddle welding. (501-25 Body Repairs - General Information, 2. Rocker Panel Trim Refer to: Front Seat (501-10 Seating, Removal and Installation). Refer to: Rear Seat Cushion (501-10 Seating, Removal and Installation). Refer to: Rear Seat Backrest (501-10 Seating, Removal and Installation). Refer to: B-Pillar Trim Panel - 5-Door (501-05 Interior Trim and Ornamentation, Removal • • Front and Rear Door harness away from the working area. 3. General Equipment: Air Body Saw • G1133589en 501-29- 29 Side Panel Sheet Metal Repairs 501-29- 29 REMOVAL AND INSTALLATION Refer to: Tools and Equipment for Body Repairs 201 |