|
|
• Replace damaged or aged seals. Prevent kinks. • The contact pressure can be changed by adjusting the catch bolt or correcting the panel • Even out the uneven welded flange thicknesses. Properly repair any paint damage that occurs. • If water entry is caused by a spot weld (burr on the surface), this must be rectified and Tailgate sealing rubber Leaks at the tailgate rubber seal have the same Rubber grommets / plugs Rubber grommets or plugs are fitted at numerous Example: Possible problem locations in the Description Des cript ion Hinge seal 1 Cable duct 2 Leaks can be caused by badly fitted or damaged Damaged cable insulation can also cause leaks. Where components are bolted on, water can enter To resolve • Correctly fit rubber grommets / plugs. During fitting, ensure that the sealing lips are not • The contact area of the rubber grommets / plugs can also be sealed with PU sealing compound. • Replace the damaged rubber grommets and repair the damaged cable insulation. • Smooth the panel deformations in the contact area of the plugs. Heater housing/ventilation Loose butyl sealing strips, damaged sealing G468074en 501-25- 74 Body Repairs - General Information 501-25- 74 DESCRIPTION AND OPERATION 201 |