|
|
3. Make sure that your vehicle is on level ground. 4. Switch the engine off and wait 15 minutes for the oil to drain into the oil 5. Open the hood. See Opening and 6. Remove the dipstick and wipe it with a clean, lint-free cloth. See Under 7. Replace the dipstick and remove it 8. Make sure that the oil level is between the maximum and minimum marks. If 9. If the oil level is correct, replace the dipstick and make sure it is fully seated. Note: Do not remove the dipstick when the engine is running. Note: If the oil level is between the maximum and minimum marks, the oil level Note: The oil consumption of new engines reaches its normal level after approximately Adding Engine Oil WARNING Do not remove the filler cap when Do not use supplemental engine oil E142732 Only use oils certified for gasoline engines To top up the engine oil level do the 1. Clean the area surrounding the engine 2. Remove the engine oil filler cap. See Turn it counterclockwise and remove 3. Add engine oil that meets Ford specifications. See Capacities and (page 237). You may have to use a funnel to pour the engine 4. Recheck the oil level. 5. If the oil level is correct, replace the dipstick and make sure it is fully seated. 6. Replace the engine oil filler cap. Turn it clockwise until you feel a strong Note: Do not add oil further than the maximum mark. Oil levels above the |